STANDARD DIMENSIONS
Aluminum Mirror-Finish End Mill Sizes
Review the dimensional drawing, typical applications and standard order numbers for the mirror-finish aluminum series.
Flutes3
Helix35°
Cutting Ø0 / −0.02 mm
Shank / Runouth6 / ≤0.01 mm
Machinable Materials
Polished for bright surfaces and low-burr cutting.
MIRROR-FINISH ALUMINUM SERIES
3-Flute Mirror-Finish Flat End Mills
Typical Applications
Mirror Finishing and Low-Burr Milling
For aluminum parts requiring smooth walls, bright finishes and reduced built-up edge during side and shoulder milling.
Standard Dimensions
Select the order number that matches the required cutting diameter, flute length, shank diameter and overall length.
| Order No. | Ød | L1 | ØD | OAL | Flutes |
|---|---|---|---|---|---|
| ALMF-1.0-50-3F | 1 | 3 | 4 | 50 | 3 |
| ALMF-1.5-50-3F | 1.5 | 4 | 4 | 50 | 3 |
| ALMF-2.0-50-3F | 2 | 6 | 4 | 50 | 3 |
| ALMF-2.5-50-3F | 2.5 | 7.5 | 4 | 50 | 3 |
| ALMF-3.0-50A-3F | 3 | 9 | 3 | 50 | 3 |
| ALMF-3.0-50B-3F | 3 | 9 | 4 | 50 | 3 |
| ALMF-3.0-75B-3F | 3 | 12 | 4 | 75 | 3 |
| ALMF-3.5-50-3F | 3.5 | 10.5 | 4 | 50 | 3 |
| ALMF-4.0-50-3F | 4 | 12 | 4 | 50 | 3 |
| ALMF-4.0-75-3F | 4 | 16 | 4 | 75 | 3 |
| ALMF-4.5-60-3F | 4.5 | 13.5 | 6 | 60 | 3 |
| ALMF-5.0-50-3F | 5 | 15 | 6 | 50 | 3 |
| ALMF-5.5-50-3F | 5.5 | 16.5 | 6 | 50 | 3 |
| ALMF-6.0-50-3F | 6 | 18 | 6 | 50 | 3 |
| ALMF-6.0-75-3F | 6 | 25 | 6 | 75 | 3 |
| ALMF-6.0-100-3F | 6 | 30 | 6 | 100 | 3 |
| ALMF-8.0-60-3F | 8 | 24 | 8 | 60 | 3 |
| ALMF-8.0-75-3F | 8 | 30 | 8 | 75 | 3 |
| ALMF-8.0-100-3F | 8 | 35 | 8 | 100 | 3 |
| ALMF-10-75-3F | 10 | 30 | 10 | 75 | 3 |
| ALMF-10-100-3F | 10 | 40 | 10 | 100 | 3 |
| ALMF-10-150-3F | 10 | 60 | 10 | 150 | 3 |
| ALMF-12-75-3F | 12 | 36 | 12 | 75 | 3 |
| ALMF-12-100-3F | 12 | 45 | 12 | 100 | 3 |
| ALMF-12-150-3F | 12 | 60 | 12 | 150 | 3 |
| ALMF-14-100-3F | 14 | 42 | 14 | 100 | 3 |
Need a Standard Size or Custom End Mill?
Send us the order number, required quantity and workpiece material. If the size is not listed, include the cutting diameter, flute length, shank diameter and overall length for evaluation.