STANDARD DIMENSIONS
60° DLC Aluminum U-Flute End Mill Sizes
Review the dimensional drawing, typical applications and standard order numbers for the DLC-coated U-flute aluminum series.
CoatingDLC
Helix45°
Cutting Ø0 / −0.02 mm
Shank / Runouth6 / ≤0.01 mm
Machinable Materials
U-flute geometry supports efficient chip evacuation.
60° DLC ALUMINUM SERIES
3-Flute DLC U-Flute End Mills
Typical Applications
High-Efficiency Aluminum Milling
For high-speed slotting, side milling and flat-bottom machining with efficient chip evacuation and reduced adhesion.
Standard Dimensions
Select the order number that matches the required cutting diameter, flute length, shank diameter and overall length.
| Order No. | Ød | L1 | ØD | OAL | Flutes |
|---|---|---|---|---|---|
| 60-ALU-1.0-50-3F | 1 | 3 | 4 | 50 | 3 |
| 60-ALU-1.5-50-3F | 1.5 | 4 | 4 | 50 | 3 |
| 60-ALU-2.0-50-3F | 2 | 6 | 4 | 50 | 3 |
| 60-ALU-2.5-50-3F | 2.5 | 7 | 4 | 50 | 3 |
| 60-ALU-3.0-50B-3F | 3 | 9 | 4 | 50 | 3 |
| 60-ALU-4.0-50-3F | 4 | 12 | 4 | 50 | 3 |
| 60-ALU-5.0-50A-3F | 5 | 15 | 5 | 50 | 3 |
| 60-ALU-5.0-50B-3F | 5 | 15 | 6 | 50 | 3 |
| 60-ALU-6.0-50-3F | 6 | 15 | 6 | 50 | 3 |
| 60-ALU-6.0-75-3F | 6 | 25 | 6 | 75 | 3 |
| 60-ALU-6.0-100-3F | 6 | 30 | 6 | 100 | 3 |
| 60-ALU-8.0-60-3F | 8 | 24 | 8 | 60 | 3 |
| 60-ALU-8.0-75-3F | 8 | 30 | 8 | 75 | 3 |
| 60-ALU-8.0-100-3F | 8 | 35 | 8 | 100 | 3 |
| 60-ALU-10-75-3F | 10 | 30 | 10 | 75 | 3 |
| 60-ALU-10-100-3F | 10 | 40 | 10 | 100 | 3 |
| 60-ALU-12-75-3F | 12 | 35 | 12 | 75 | 3 |
| 60-ALU-12-100-3F | 12 | 45 | 12 | 100 | 3 |
Need a Standard Size or Custom End Mill?
Send us the order number, required quantity and workpiece material. If the size is not listed, include the cutting diameter, flute length, shank diameter and overall length for evaluation.