STANDARD DIMENSIONS
Carbide Chamfer End Mill Sizes
Review the standard dimensions for PRONIXT coated chamfer end mills for steel and uncoated chamfer end mills for aluminum in 60°, 90° and 120° options.
CBS · NACO4 COATED
Coated Chamfer End Mills for Steel
Deburring, Countersinking and Edge Preparation
For controlled chamfering, countersinking and edge preparation in cast iron, stainless steel and steel up to HRC 40.
Standard Dimensions
Select the order number that matches the required cutting diameter, included angle, shank diameter and overall length.
| Order No. | Ød | A° | ØD | OAL | Flutes |
|---|---|---|---|---|---|
| 55-CBS-3.0-50-60°-2F | 3 | 60° | 3 | 50 | 2 |
| 55-CBS-4.0-50-60°-2F | 4 | 60° | 4 | 50 | 2 |
| 55-CBS-6.0-50-60°-2F | 6 | 60° | 6 | 50 | 2 |
| 55-CBS-8.0-50-60°-2F | 8 | 60° | 8 | 50 | 2 |
| 55-CBS-10-75-60°-2F | 10 | 60° | 10 | 75 | 2 |
| 55-CBS-12-75-60°-2F | 12 | 60° | 12 | 75 | 2 |
| 55-CBS-3.0-50-90°-2F | 3 | 90° | 3 | 50 | 2 |
| 55-CBS-4.0-50-90°-2F | 4 | 90° | 4 | 50 | 2 |
| 55-CBS-6.0-50-90°-2F | 6 | 90° | 6 | 50 | 2 |
| 55-CBS-8.0-50-90°-2F | 8 | 90° | 8 | 50 | 2 |
| 55-CBS-10-75-90°-2F | 10 | 90° | 10 | 75 | 2 |
| 55-CBS-12-75-90°-2F | 12 | 90° | 12 | 75 | 2 |
| 55-CBS-3.0-50-120°-2F | 3 | 120° | 3 | 50 | 2 |
| 55-CBS-4.0-50-120°-2F | 4 | 120° | 4 | 50 | 2 |
| 55-CBS-6.0-50-120°-2F | 6 | 120° | 6 | 50 | 2 |
| 55-CBS-8.0-50-120°-2F | 8 | 120° | 8 | 50 | 2 |
| 55-CBS-10-75-120°-2F | 10 | 120° | 10 | 75 | 2 |
| 55-CBS-12-75-120°-2F | 12 | 120° | 12 | 75 | 2 |
CBL · UNCOATED ALUMINUM
Uncoated Chamfer End Mills for Aluminum
Clean Chamfers with Reduced Burrs
For smooth chamfering, countersinking and deburring in aluminum, acrylic and copper where a clean edge and reduced burrs are required.
Standard Dimensions
Select the order number that matches the required cutting diameter, included angle, shank diameter and overall length.
| Order No. | Ød | A° | ØD | OAL | Flutes |
|---|---|---|---|---|---|
| 55-CBL-3.0-50-60°-2F | 3 | 60° | 3 | 50 | 2 |
| 55-CBL-4.0-50-60°-2F | 4 | 60° | 4 | 50 | 2 |
| 55-CBL-6.0-50-60°-2F | 6 | 60° | 6 | 50 | 2 |
| 55-CBL-8.0-50-60°-2F | 8 | 60° | 8 | 50 | 2 |
| 55-CBL-10-75-60°-2F | 10 | 60° | 10 | 75 | 2 |
| 55-CBL-12-75-60°-2F | 12 | 60° | 12 | 75 | 2 |
| 55-CBL-3.0-50-90°-2F | 3 | 90° | 3 | 50 | 2 |
| 55-CBL-4.0-50-90°-2F | 4 | 90° | 4 | 50 | 2 |
| 55-CBL-6.0-50-90°-2F | 6 | 90° | 6 | 50 | 2 |
| 55-CBL-8.0-50-90°-2F | 8 | 90° | 8 | 50 | 2 |
| 55-CBL-10-75-90°-2F | 10 | 90° | 10 | 75 | 2 |
| 55-CBL-12-75-90°-2F | 12 | 90° | 12 | 75 | 2 |
| 55-CBL-3.0-50-120°-2F | 3 | 120° | 3 | 50 | 2 |
| 55-CBL-4.0-50-120°-2F | 4 | 120° | 4 | 50 | 2 |
| 55-CBL-6.0-50-120°-2F | 6 | 120° | 6 | 50 | 2 |
| 55-CBL-8.0-50-120°-2F | 8 | 120° | 8 | 50 | 2 |
| 55-CBL-10-75-120°-2F | 10 | 120° | 10 | 75 | 2 |
| 55-CBL-12-75-120°-2F | 12 | 120° | 12 | 75 | 2 |
Need a Chamfer Tool for Your Edge Feature?
Send us the required angle, diameter, chamfer size, workpiece material and quantity for technical evaluation and series selection.