STANDARD DIMENSIONS
Top & Bottom Chamfer End Mill Sizes
Review the standard dimensions for PRONIXT 90° top and bottom chamfer end mills for machining upper and lower edge chamfers with fewer setups.
TBS · NACO4 COATED
Coated Top & Bottom Chamfer End Mills
Upper and Lower Edge Chamfering in One Setup
For machining upper and lower 90° edge chamfers in stainless steel, alloy steel, spring steel, cast iron and carbon steel.
Standard Dimensions
Select the order number that matches the required cutting diameter, neck diameter, chamfer dimensions, shank diameter and overall length.
| Order No. | Ød | d1 | A° | L1 | L2 | ØD | OAL | Flutes |
|---|---|---|---|---|---|---|---|---|
| 60-TBS-2.0-50-90°-4F | 2 | 1 | 90° | 1 | 4 | 4 | 50 | 4 |
| 60-TBS-2.5-50-90°-4F | 2.5 | 1.25 | 90° | 1.3 | 6 | 4 | 50 | 4 |
| 60-TBS-3.0-50-90°-4F | 3 | 1.5 | 90° | 1.5 | 8 | 4 | 50 | 4 |
| 60-TBS-4.0-50-90°-4F | 4 | 2 | 90° | 2 | 8 | 4 | 50 | 4 |
| 60-TBS-5.0-50-90°-4F | 5 | 2.5 | 90° | 2.5 | 10 | 6 | 50 | 4 |
| 60-TBS-6.0-50-90°-4F | 6 | 3 | 90° | 3 | 10 | 6 | 50 | 4 |
| 60-TBS-8.0-60-90°-4F | 8 | 4 | 90° | 4 | 12 | 8 | 60 | 4 |
| 60-TBS-10-75-90°-4F | 10 | 5 | 90° | 5 | 15 | 10 | 75 | 4 |
| 60-TBS-12-75-90°-4F | 12 | 6 | 90° | 6 | 18 | 12 | 75 | 4 |
TBL · UNCOATED ALUMINUM
Uncoated Top & Bottom Chamfer End Mills
Clean Two-Sided Chamfering in Non-Ferrous Materials
For machining upper and lower 90° edge chamfers in aluminum, acrylic and copper with smooth cutting and reduced burrs.
Standard Dimensions
Select the order number that matches the required cutting diameter, neck diameter, chamfer dimensions, shank diameter and overall length.
| Order No. | Ød | d1 | A° | L1 | L2 | ØD | OAL | Flutes |
|---|---|---|---|---|---|---|---|---|
| 60-TBL-2.0-50-90°-4F | 2 | 1 | 90° | 1 | 4 | 4 | 50 | 4 |
| 60-TBL-2.5-50-90°-4F | 2.5 | 1.25 | 90° | 1.3 | 6 | 4 | 50 | 4 |
| 60-TBL-3.0-50-90°-4F | 3 | 1.5 | 90° | 1.5 | 8 | 4 | 50 | 4 |
| 60-TBL-4.0-50-90°-4F | 4 | 2 | 90° | 2 | 8 | 4 | 50 | 4 |
| 60-TBL-5.0-50-90°-4F | 5 | 2.5 | 90° | 2.5 | 10 | 6 | 50 | 4 |
| 60-TBL-6.0-50-90°-4F | 6 | 3 | 90° | 3 | 10 | 6 | 50 | 4 |
| 60-TBL-8.0-60-90°-4F | 8 | 4 | 90° | 4 | 12 | 8 | 60 | 4 |
| 60-TBL-10-75-90°-4F | 10 | 5 | 90° | 5 | 15 | 10 | 75 | 4 |
| 60-TBL-12-75-90°-4F | 12 | 6 | 90° | 6 | 18 | 12 | 75 | 4 |
Need a Top & Bottom Chamfer Tool?
Send us the required chamfer width, workpiece thickness, access conditions, material and quantity for technical evaluation and size selection.