STANDARD DIMENSIONS
Carbide T-Slot End Mill Sizes
Review the standard dimensions for PRONIXT TS coated and TL uncoated carbide T-slot end mills for T-slots, recessed grooves and undercut features.
TS · NACO4 COATED
Coated T-Slot End Mills for Steel
T-Slots, Recessed Grooves and Undercuts
For controlled T-slot machining, recessed grooves and undercut features in stainless steel, alloy steel, spring steel, cast iron and carbon steel.
Standard Dimensions
Select the order number that matches the required cutting diameter, neck diameter, slot height, reach, shank diameter and overall length.
| Order No. | Ød | d1 | H | L1 | ØD | OAL | Flutes |
|---|---|---|---|---|---|---|---|
| 60-TS-4.0-0.5H-50-4F | 4 | 2 | 0.5 | 6 | 4 | 50 | 4 |
| 60-TS-4.0-1.0H-50-4F | 4 | 2 | 1 | 6 | 4 | 50 | 4 |
| 60-TS-4.0-1.5H-50-4F | 4 | 2 | 1.5 | 6 | 4 | 50 | 4 |
| 60-TS-4.0-2.0H-50-4F | 4 | 2 | 2 | 6 | 6 | 50 | 4 |
| 60-TS-6.0-1.0H-50-4F | 6 | 6 | 1 | 8 | 6 | 50 | 4 |
| 60-TS-6.0-1.5H-50-4F | 6 | 6 | 1.5 | 8 | 6 | 50 | 4 |
| 60-TS-6.0-2.0H-50-4F | 6 | 6 | 2 | 8 | 6 | 50 | 4 |
| 60-TS-8.0-1.0H-50-4F | 8 | 4 | 1 | 12 | 8 | 50 | 4 |
| 60-TS-8.0-1.5H-50-4F | 8 | 4 | 1.5 | 12 | 8 | 50 | 4 |
| 60-TS-8.0-2.0H-50-4F | 8 | 4 | 2 | 12 | 8 | 50 | 4 |
| 60-TS-10-1.0H-60-4F | 10 | 5 | 1 | 15 | 10 | 60 | 4 |
| 60-TS-10-1.5H-60-4F | 10 | 5 | 1.5 | 15 | 10 | 60 | 4 |
| 60-TS-10-2.0H-60-4F | 10 | 5 | 2 | 15 | 10 | 60 | 4 |
| 60-TS-12-1.0H-60-4F | 12 | 6 | 1 | 15 | 12 | 60 | 4 |
| 60-TS-12-1.5H-60-4F | 12 | 6 | 1.5 | 15 | 12 | 60 | 4 |
| 60-TS-12-2.0H-60-4F | 12 | 6 | 2 | 15 | 12 | 60 | 4 |
| 60-TS-12-3.0H-60-4F | 12 | 6 | 3 | 15 | 12 | 60 | 4 |
TL · UNCOATED ALUMINUM
Uncoated T-Slot End Mills for Aluminum
Clean T-Slots and Undercuts in Non-Ferrous Materials
For smooth T-slot machining, recessed grooves and undercut features in aluminum, acrylic and copper where reduced burrs and clean edges are required.
Standard Dimensions
Select the order number that matches the required cutting diameter, neck diameter, slot height, reach, shank diameter and overall length.
| Order No. | Ød | d1 | H | L1 | ØD | OAL | Flutes |
|---|---|---|---|---|---|---|---|
| 60-TL-4.0-0.5H-50-4F | 4 | 2 | 0.5 | 6 | 4 | 50 | 4 |
| 60-TL-4.0-1.0H-50-4F | 4 | 2 | 1 | 6 | 4 | 50 | 4 |
| 60-TL-4.0-1.5H-50-4F | 4 | 2 | 1.5 | 6 | 4 | 50 | 4 |
| 60-TL-4.0-2.0H-50-4F | 4 | 2 | 2 | 6 | 6 | 50 | 4 |
| 60-TL-6.0-1.0H-50-4F | 6 | 6 | 1 | 8 | 6 | 50 | 4 |
| 60-TL-6.0-1.5H-50-4F | 6 | 6 | 1.5 | 8 | 6 | 50 | 4 |
| 60-TL-6.0-2.0H-50-4F | 6 | 6 | 2 | 8 | 6 | 50 | 4 |
| 60-TL-8.0-1.0H-50-4F | 8 | 4 | 1 | 12 | 8 | 50 | 4 |
| 60-TL-8.0-1.5H-50-4F | 8 | 4 | 1.5 | 12 | 8 | 50 | 4 |
| 60-TL-8.0-2.0H-50-4F | 8 | 4 | 2 | 12 | 8 | 50 | 4 |
| 60-TL-10-1.0H-60-4F | 10 | 5 | 1 | 15 | 10 | 60 | 4 |
| 60-TL-10-1.5H-60-4F | 10 | 5 | 1.5 | 15 | 10 | 60 | 4 |
| 60-TL-10-2.0H-60-4F | 10 | 5 | 2 | 15 | 10 | 60 | 4 |
| 60-TL-12-1.0H-60-4F | 12 | 6 | 1 | 15 | 12 | 60 | 4 |
| 60-TL-12-1.5H-60-4F | 12 | 6 | 1.5 | 15 | 12 | 60 | 4 |
| 60-TL-12-2.0H-60-4F | 12 | 6 | 2 | 15 | 12 | 60 | 4 |
| 60-TL-12-3.0H-60-4F | 12 | 6 | 3 | 15 | 12 | 60 | 4 |
Need a T-Slot Cutter for Your Groove?
Send us the slot width, slot height, neck clearance, workpiece material, drawing and quantity for technical evaluation and size selection.