TF48 / 173E Collet
Dimensions, equivalent numbers, PRONIXT bore capacities and common machine references for the TF48 collet. Steel, carbide-lined and customized bore options are available for application-specific production.
TF48 Collet Product and Dimensional Reference
Compare the product reference with the dimensional drawing. Confirm the complete machine model and original dimensions before ordering.
Equivalent Model References
Common cross-references for this dimensional family. Confirm the complete dimensions and machine application before ordering.
TF48 / 173E Collet Dimensions
PRONIXT order number C-480600. Dimensions are shown in millimeters.
| Order No. | Ød | ØD | L | ØA | ØB | A° (Half Angle) | Material |
|---|---|---|---|---|---|---|---|
| C-480600 | 48.0 | 60.0 | 94.0 | 50.0 | 9.0 | 15° | Steel / Carbide-Lined |
Technical note: Bore capacities shown above are PRONIXT reference values, not universal limits for every supplier. Final bore profile and gripping configuration must be confirmed before production.
Common Swiss-Type Lathe References
Common references for selected 38 mm and 42 mm-class Swiss-type lathe applications. Exact compatibility depends on machine configuration and tooling position.
Machine names are cross-reference starting points only. Confirm the machine model, tooling position, original marking and dimensions because similar-looking collets may not be interchangeable.
Available TF48 Collet Options
Select the bore and material according to the workpiece and gripping requirement.
- Standard hardened steel construction
- Carbide-lined bore for improved wear resistance
- Round, hexagon and square bore profiles
- Smooth bore or anti-slip groove configuration
- Customized bore size or special profile from drawing or sample
Information Required for Ordering
Provide the following details for technical confirmation.
- Complete machine brand and model
- Main-spindle or sub-spindle tooling position
- Required bore diameter and workpiece profile
- Actual bar size, tolerance and workpiece material
- Required material, quantity, drawing, photos or sample
Continue Your Collet Selection
Compare related models, verify accuracy or identify an unknown collet.
Frequently Asked Questions
Are TF48, 173E and F48 76-81 the same collet?
They are commonly used as cross-references for the same general dimensional family. Confirm the outside diameter, overall length, taper and machine application before ordering.
Does every 38 mm and 42 mm-class Swiss-type lathe use a TF48 collet?
No. Machines with a similar nominal capacity may use different collet dimensions. Confirm the machine model, tooling position and original tool.
Can TF48 collets be produced with hexagon or square bores?
Yes. PRONIXT reference capacities are Ø42 round, 36 AF hexagon and 29 AF square. Other profiles can be evaluated from a drawing or sample.
Need a TF48 / 173E Collet?
Send the machine model, tooling position, bore size, workpiece profile and quantity. Drawings, photos or samples are welcome.